Elsema Gigalink GLR2708 설정 및 프로그래밍 지침 - 페이지 6

{카테고리_이름} Elsema Gigalink GLR2708에 대한 설정 및 프로그래밍 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Elsema Gigalink GLR2708 8 페이지. 8-channel 27mhz receiver with open collector outputs
Elsema Gigalink GLR2708에 대해서도 마찬가지입니다: 매뉴얼 (7 페이지)

페이지 인쇄

SPECIAL PROGRAMMING FEATURE FOR GIGALINK

Forward Programming

GIGALINK

receivers have an additional programming feature, known as forward programming.

™

This feature allows the user to program the transmitter code into the receivers. This will enable the

transmitters to activate unlimited number of receivers simultaneously.

Step 1:

Connect power to the receiver and transmitter.

Step 2:

Place a jumper across the CC pins of the receiver.

Step 3:

Connect the transmitter and receiver using the coding cable.

Step 4:

Press the transmitter button for 2 seconds.

Step 5:

Remove the coding cable.

Step 6:

Remove the jumper from the CC pin.

The receiver is now programmed with the transmitter's code. Repeat the above steps to program

another receiver.

ACCESSORIES AVAILABLE

Weatherproof Case

for receiver unit

Suitable Antennas

ANT27 series (27MHz Series) or

ANT433 series (433MHz Series)

Gigalink

™

For coding Gigalink

transmitters to receivers

Suitable Power packs

12PP-1000, 12V DC 1000mA

24PP, 24V DC 500mA.

For detailed information visit www.elsema.com

™

Coding Cable

SUPREG12, SUPREG24

Supply and Battery charger. Ideal

for charging backup battery and

supplying the receiver.

QM100

Quick Mount for easy mounting

of receivers on walls.