Dustbane Gladiator 712 + Rider 운영 매뉴얼 - 페이지 14

{카테고리_이름} Dustbane Gladiator 712 + Rider에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dustbane Gladiator 712 + Rider 19 페이지. Gladiator series

• Remove the back wheels

• Remove the rear bin

• Unscrew the two pins fixing the flap (ref. 3).

• Grip the flap and pull (ref. 4)

• Replace the flap, insert the two pins in the relative holes

• Screw up the fixing pins and assemble the machine.

8.2.3. Center brush: replacing

1. Remove the front bin

2. Unscrew the screws fixing the brush to the shaft.

3. Remove the brush

4. Replace the brush making sure the orientation of the bristles is correct.

• Lift the front of the machine

• Unscrew the screw (ref. 1), remove the worn brush

• Install the new brush and fix it with the screw (ref. 1).

• Unscrew the two screws (ref. 1), adjust the height of the brush and tighten the screws.