4qd JSK-120 사용 설명서 - 페이지 2

{카테고리_이름} 4qd JSK-120에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4qd JSK-120 4 페이지.

Mounting

The JSK-120 requires a 47mm diameter hole in the mounting panel. There is no

limitation on the panel thickness.

Connections

The JSK-120 uses the Vishay 981HE sensor and the wiring colours are somewhat

counter intuitive....



Green = +5V



Red = Signal



Yellow = Ground [0V]

These should be connected to the Pro-160 / 360 control board as follows.

Calibration

The Pro-160 / 360 should have the throttle setting / input mode set to "volt".

If the center detent is being kept, joystick mode should be set to "on".

The pot learn procedure should then be carried out as described in the

controller manual.

JSK-120 V1.0 05/21

Page 2