AUSTIN SCIENTIFIC M600-HV 매뉴얼 - 페이지 7
{카테고리_이름} AUSTIN SCIENTIFIC M600-HV에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTIN SCIENTIFIC M600-HV 13 페이지.
페이지 인쇄3.3 ELECTRICAL CONNECTIONS
3.3.1 POWER INPUT
The power input can be adjusted to accommodate the different volt
outputs from the customer.
3.3.2 MAIN CABLE AND LEADS
Production units can be fit with a variety of cord lengths and
connectors. Which polarized connector, if any, are to be fitted to
production units is yet to be determined.
3.3.3 COLD HEAD OUTPUT
The stock compressor will have the ability to control Austin
Scientifics' cold heads. Compressors can be easily fitted with a wide
variety of cold head drives, connectors and cables to meet customer
requirements.
3.3.4 AUTO RESTART FUNCTION
Our unit will have an automatic restart with brownout or blackout in
power, when power is reapplied to the system. A manual reset will be
necessary for a unit that stops operating with a fault condition.
3.4 MULTI-CRYO SYSTEMS
3.4.1 COMPRESSOR CAPACITIES
The stock compressor has the ability to supply multiple cold heads.
Compressors can be operated with various Cryopump configurations.
Using Helium hose manifolds and drive cable Splitter Boxes to meet
customer requirements.
3.4.2 CRYOPUMP CONFIGURATIONS
The M600 is capable of operating cryopumps in the following
configurations.
1. Up to Three (3) CP-8's.
2. Two (2) CP-10's, or one CP-10 & one CP-8
3. One (1) CP-16