Aircommand Jabiru 설치 지침
{카테고리_이름} Aircommand Jabiru에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aircommand Jabiru 5 페이지.
페이지 인쇄Jabiru Installation instructions
Step Description
1
Mark out centre line of the
installation
2
Align centre line of installation
with the centre line of the
"Front Panel Cut out"
template.
Align "FLOOR" on template
with floor of vehicle. Tape
template in place
3
Drill 4 x 10mm holes in the
corner of the cut out region.
Remove template. Use jig saw to
cut out between the outside of
the 10 mm holes
4
Align centre line of
"Floor cut out" template
with centre line of installation.
Align front face of cupboard
with line on template. Tape
template in place
5
Drill the 10mm holes as marked
on floor cut out template.
Use jig saw to cut out the areas
between the 10mm holes
Jabiru Installation instruction
Version 3 Issued 12/7/11
Page 1 of 5