Aircommand Jabiru 설치 지침 - 페이지 5
{카테고리_이름} Aircommand Jabiru에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aircommand Jabiru 5 페이지.
페이지 인쇄14
Insert condenser duct through
the hole in the external wall and
inside the condenser air spigot.
Ensure the duct is pushed in as
far as possible.
Trim excess duct so it is flush
with outside wall.
15
Insert external condenser grill
inside the duct.
Fix in place with 4 screws.
Cover screw heads with push in
plugs provided
NOTE - Ensure that the grille is
installed as shown with the
louvers sloping downwards to
prevent rain entering duct.
16
Plug the 3 pin IEC service cable
into the socket
Refer to step 7 for the location of
this hole
17
Installation complete
Jabiru Installation instruction
Version 3 Issued 12/7/11
Page 5 of 5