Aircommand Jabiru 설치 지침 - 페이지 4

{카테고리_이름} Aircommand Jabiru에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Aircommand Jabiru 5 페이지.

Locate three holes on the inside

of the units sheet steel cover.

Use screws provided to secure

the unit to the bracing. Repeat

for three holes on other side of

unit

Locate the control cable plug

on the printed circuit board at

the back of the fascia

Take the grey control cable from

the unit and plug it into the

socket on the board.

Take care to ensure that the plug

is around the correct way and is

fully engaged.

Push fascia into position.

Use the fascia as a guide to drill

6 x 3mm pilot holes for the

attachment screws.

Install fascia with six screws and

cover with screw caps

Jabiru Installation instruction

Version 3 Issued 12/7/11

Page 4 of 5