Hi-Link HLK-LD1125H-24G 애플리케이션 매뉴얼 - 페이지 6
{카테고리_이름} Hi-Link HLK-LD1125H-24G에 대한 애플리케이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hi-Link HLK-LD1125H-24G 17 페이지. Human presence detection radar
페이지 인쇄
The module and serial board can be connected as shown as above:
Module 1 pin is connected to serial board 5V
Module 2 pin is connected to serial board GND
Module 3 pin is connected to serial board TX module
Module 4 pin is connected to serial board RX
5.Debug configuration
The HLK-LD1125H-24G can be debugged and tested on the computer through the serial port
assistant.
Use any serial debugging tool. The baud rate is 115200, 8 data bits, 1 stop bit, check bit and
flow control are None, select ASCII for receive settings, and select ASCII for send settings.
5
Product supports UART text protocol
baud rate
1
word width
2
stop bit
3
even-odd
4
check
115200
8bit
1
None