Great Little Trading Blake L5357 조립 지침 매뉴얼 - 페이지 10
{카테고리_이름} Great Little Trading Blake L5357에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Blake L5357 11 페이지. Storage bench
페이지 인쇄
STEP 14:
Take 1x drawer side panel (J) and attach 1x L-shaped
runner (#12). Align the runner with the drill holes on the
edge and with the wheel next to the 2 drill holes on the
outside of the panel as shown. Using the runner holes
shown, insert 3x runner screws (#9).
Repeat with 2nd drawer side panel (J).
Repeat with 2x drawer side panels (K), using 2x L-shaped
runners (#13) and 6x runner screws (#9).
Ensure the screws are fully inserted to allow for a free
running drawer.
#9
#9
#9
x2
J
#9
#9
#13
Hardware for Step 14:
Hardware for Step 13:
12x #9 Screws 12mmL
2x #12 L Shaped Runner
2x #13 L Shaped Runner
#9
#9
#9
#12
#9
#9
#9
#9
#13
K
#4
J
#7
#4
#4
#7
M
J
x2
10
#7
K
#4
#7
L
#4
Create the drawers. Take 1x drawer side panel
x2
(J) and join to drawer back panel (L) using 2x
wooden dowels (#4) and 2x wood screws
(#7). Ensure the grooves are aligned on the
inside of the drawer box you are creating.
Now attach 1x drawer side panel (K) to the
other end of panel L using 2x wooden dowels
#7
(#4) and 2x wood screws (#7), again aligning
Repeat with the remaining panels J, K & L to
Slide in drawer base panel (M) to the
K
L
x2
Hardware for Step 15:
8x #4 Wooden Dowels
8x #7 Wood Screws (25mm)
STEP 15:
the grooves on the inside.
create the 2nd drawer box.
STEP 16:
BOTH drawer boxes.