Great Little Trading Blake L5357 조립 지침 매뉴얼 - 페이지 9

{카테고리_이름} Great Little Trading Blake L5357에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Great Little Trading Blake L5357 11 페이지. Storage bench

페이지 인쇄

Great Little Trading Blake L5357 조립 지침 매뉴얼

STEP 12:

Position the unit as shown to mount the flat runners on the

RH faces of the panels.

Start with the central divider (C) and position 1x flat

runner (#10) as shown with the wheel at the front of the

unit on the lower edge. Fix in place with 2x runner screws

(#9). When in place the runner will be level with the front

of panel C.

Now attach 1x flat runner (#10) to the RH side panel (D),

again with the wheel at the front and on the lower edge.

Fix in place using the holes shown with 3x runner screws

(#9). When in place the runner will sit back 15mm from the

front edge of panel D.

Hardware for Step 12:

5x #9 Runner Screws

2x #10 Flat Runners

Remarque:

Note:

GBR

Il est important

It is important

d'utiliser les trous

to use the screw

de vis illustrés,

holes shown or

sinon vos glissières

your runners

ne seront pas

will not sit in the

placées dans la

correct position.

bonne position.

Hinweis:

Nota:

DEU

Es importante

Es ist wichtig,

utilizar los orificios

die abgebildeten

para tornillos

Schraubenlöcher

zu verwenden,

que se muestran

sonst sitzen Ihre

o las guías no se

Läufer nicht in der

asentarán en la

posición correcta.

richtigen Position.

#10

STEP 13:

Now mount the flat runners on the LH faces of the

panels.

Start with the central divider (C) and position 1x flat

runner (#11) as shown with the wheel at the front of

the unit on the lower edge. Fix in place with 3x runner

screws (#9). When in place the runner will be level with

the front of panel C.

Now attach 1x flat runner (#11) to the LH side panel (E),

again with the wheel at the front and on the lower edge.

Fix in place using the holes shown with 3x runner screws

(#9). When in place the runner will sit back 15mm from

the front edge of panel E.

FRA

ESP

#11

Hardware for Step 13:

6x #9 Runner Screws

2x #11 Flat Runners