GREAT PLANES COMBAT MUSTANG Combat P-51 ARF 사용 설명서 - 페이지 9

{카테고리_이름} GREAT PLANES COMBAT MUSTANG Combat P-51 ARF에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES COMBAT MUSTANG Combat P-51 ARF 20 페이지.

Install the Belly Pan

1. Cut the covering from the mounting bolt holes and the

edges of the belly pan.

2. Install the wing onto the fuselage with two 1/4-20

nylon bolts. Place the belly pan in position on the bottom of

the wing, aligning the holes in the belly pan with the bolt

heads on the bottom of the wing. Trace the outline of the

belly pan onto the wing. Cut the covering away from the

wing inside the lines you have drawn.

3. Glue the belly pan to the fuselage by applying a small

bead of medium CA to the edges of the belly pan and

carefully positioning it on the wing.

Install the Horizontal Stabilizer,

Elevator & Vertical Fin

1. Cut the covering away from the fuselage for the

horizontal stabilizer and vertical fin.

2. Insert the horizontal stab into the fuselage. Position

the horizontal stab so that it is centered in the fuselage. The

distance from each end of the horizontal stab to the

fuselage should be the same distance.

3. Once the horizontal stab is centered, trace the outline

of the fuselage onto the top and bottom of the horizontal

stab. Remove the stab from the fuselage. Using a sharp #11

hobby blade, carefully cut the covering from the top and

bottom center-section of the horizontal stab. Be careful to

only cut through the covering and not the wood!

4. Slide the horizontal stab and elevator joiner wire into

the slot in the fuselage. Check the position of the horizontal

stab by measuring from the end of the horizontal stab to the

fuselage. Once the horizontal stab is properly positioned,