Celect DRF4 사용 설명서 - 페이지 3

{카테고리_이름} Celect DRF4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celect DRF4 8 페이지. Rf programmable thermostat for weekday/weekend setting

페이지 인쇄

the receiver. Select the cooler option when a cooler is

connected to the receiver.

J. Address setting:

In transmitter and receiver, there are dip switches to

select the addresses. The receiver ignores the message

which is sent by the transmitter with different address

setting.

K. Specification:

1. Temperature measurement: 0.0 - 40° C(0.1° C/step)

2. Accuracy:

3. Temperature control range: 5.0 - 35.0° C (0.5° C/step)

4. Terminals:

5. Electronic control:

6. Transmitter

B attery:

—

7. Receiver

I nput voltage:

—

8. Receiver

O utput voltage:

—

9. Operating temperature:

± 0.5° C

2.5mm

cable

Type 2.B action

2 x 1.5V AAA alkaline

battery

240Vac

24..240Vac 50/60Hz

10(3)A max

0 - 50° C

DRF4 RF Programmable Thermostat

1. The system includes one wireless thermostat controller

plus one RF receiver.

2. Transmits up to 20 meter indoor.

3. Communicates at 868MHz(Europe Standard) and

designed for unlicensed operation under FCC Part 15.

Warning:

1. If there is a dead zone in the RF communication. That

means the receiver may not be able to receive the

message from the transmitter. Before the installation,

check the communication first. If the communication

fails, relocate the receiver and transmitter location.

2. If the receiver has interference, set another transmitter

address. Reset the transmitter and follow the set up

instruction to reset the receiver.

3. It is recommended locate at least 30com distance from

any metal objects (including the metal box) and at least

2 meter from any electronic devices e.g. radio TV, PC,