GreatCo GBI-34 주택 소유자 설치 지침 및 운영 매뉴얼 - 페이지 9
{카테고리_이름} GreatCo GBI-34에 대한 주택 소유자 설치 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GreatCo GBI-34 10 페이지. Gallery electric fireplaces
GreatCo GBI-34에 대해서도 마찬가지입니다: 주택 소유자 설치 지침 및 운영 매뉴얼 (11 페이지), 주택 소유자 설치 지침 및 운영 매뉴얼 (11 페이지)
페이지 인쇄Problem
Fireplace not responding to remote
commands
Fireplace trips circuit breaker or blows
fuse when turned on
Heater is excessively noisy
Odor coming from heater/blower
Flame effect frozen or stuttering
Heater not outputting heat when
turned on.
LED Lighting not turning on
90245 rev A 9-5-2012
TROUBLESHOOTING
Possible Causes
Switch on fireplace not in
the ON position
Remote control battery
dead or not inserted
Remote is not in range of
fireplace or not aimed
Improper circuit rating
Too many appliances
plugged into the same
Blower assembly is dirty
Defective blower
Normal operation
Defective heater
Defective flame motor
Thermal switch tripped
Heater is defective
Thermostat is cycled off
Lighting may be defective
For more information, you can visit us online at
Http://www.GreatCo.com
Or Call Us At:
1-866-303-4028
Switch must be in the ON position for
properly
Move closer to fireplace and aim remote
correctly
Ensure unit is plugged into a dedicated 15
Unplug other appliances on the same
circuit
Blower replacement or repair necessary
Heater is burning off dust accumulated
during manufacture or non-use periods.
This should only be noticeable for a brief
Heater may require replacement or repair
Turn off unit and unplug for 5 minutes. This
is a safety feature to prevent overheating
Replacement or repair may be required
Repair or replacement may be required.
Solution
remote operation
Insert or check battery for correct
orientation
directly at it.
amp circuit
circuit
Unplug unit and clean blower
period after turning on.
Flame motor repair or replacement
required.
Set thermostat to higher setting
9