AirCycler g1 설치 및 사용 설명서 - 페이지 7

{카테고리_이름} AirCycler g1에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AirCycler g1 11 페이지. Ventilation controller
AirCycler g1에 대해서도 마찬가지입니다: 설치 테스트 매뉴얼 (2 페이지)

페이지 인쇄

3.0 CALCULATED TIME SETUP

3.1 SETTING NUMBER OF MINUTES PER HOUR OF SUPPLIED AIR FLOW REQUIRED

Enter the minutes per hour that you require fresh air to be brought into the home. Factory

default is 20 minutes. Press MODE to advance to the next setting

3.2 SETTING OPTIONAL MIXING TIME

If the user needs more central fan time for whole house mixing than the amount that is

provided by ventilation time, the central fan can be configured to run an additional time

period to complete the mixing period. Factory default is 0 or OFF. The fresh air damper

will not be open during this extra time. Press MODE to advance to the next setting.

3.3 SETTING OPERATION HOURS

If the user does not want the ventilation system to run throughout the day you can set

ON time and OFF time. Factory default is NO. If you are not setting an ON and OFF time,

press MODE and continue to section 3.4.

If you want to set hours of operation press the UP arrow for yes [YS]. Press MODE to select

yes. The AirCycler® g1 will prompt you to enter the hour you would like the ventilation

to begin and the hour you want it to end followed by the current time.

Set the hour you want ventilation to START.

Press MODE to advance to the next setting.

Set the hour you want the ventilation to STOP.

Press MODE to advance to the next setting.

3.3.1 SETTING CURRENT TIME

Enter the current time.

Press MODE to save all settings. Setup is complete.

3.4 CALCULATED TIME SETUP IS COMPLETE

Setup is complete. The AirCycler® g1 will now return to normal operation.

AC DOC

REV 9/14/2016