GReddy Turbo Kit 설치 매뉴얼 - 페이지 11

{카테고리_이름} GReddy Turbo Kit에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GReddy Turbo Kit 18 페이지. 96-98 nissan 240sx s14 (ka24de) td06-20g 8cm2
GReddy Turbo Kit에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (18 페이지)

페이지 인쇄

5. Connect the oil pressure line that was installed

in the step 3-2 to the turbocharger. Install the

turbocharger to the manifold using the provided

gasket and hardware.

6. Reinstall the engine mount bracket and rubber,

then remove the SST tool.

7. Install the suction pipe S-3 to the turbo inlet

using the provided gasket and hardware.

8. Replace the oil drain plug with the provided oil

return fitting and copper washer.

9. Install the oil return pipe to the turbo charger.

Wrap the thermo cloth to the 16

connect the oil return pipe to the oil pan.

(Parts Used #27, 32, 39, 50, 63)

10. Install the compression pipe C-1 to the turbo

out let using the provided gasket and

hardware.

11. Re install the actuator back on to the

turbocharger. Reinstall the e-clip back to the

swing valve.

(Parts Used #46, 66)

(Parts Used #7, 44, 65)

(Parts Used #28, 29)

hose and

(Parts Used #8, 45, 65)