Automation Correct Coal-trol Digital TS2 V3 사용 설명서 - 페이지 3

{카테고리_이름} Automation Correct Coal-trol Digital TS2 V3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Automation Correct Coal-trol Digital TS2 V3 16 페이지.

Instruction Manual

Read and pay careful attention before proceeding!

ATTENTION - Please follow all manufacturers instructions that came

with your stove or furnace. The Coal-Trol Digital is designed to

complement and enhance the safe operation of your appliance.

Speciﬁcally, the Coal-Trol Digital control system has been designed

for use with appliances tested to ANSI Standard Designation:

E1509-95, Standard Speciﬁcation for Room Heaters,Pellet Fuel-

Burning Type and/or UL1482, Room Heaters, Solid Fuel Type.

Use of the Coal-trol Digital™ on appliances not permanently marked with

one of the above designations voids all warranties and may be unsafe.

furnace is built in compliance with these safety standards.

WARNING - The Coal-trol Digital™ is capable of regulating a coal ﬁre

smaller than required to maintain proper chimney draft. Follow all

manufacturers recommendations for minimum draft pressures and

temperature. The use of mechanical means such as a draft inducer fan

may be required to ensure proper draft at low ﬁre. Installation of a carbon

monoxide detector (not-included) is highly recommended.

Please Keep reading...

THIS PRODUCT HAS A GROUNDING TYPE PLUG AND REQUIRES A

GROUNDING TYPE OUTLET. IF THE PLUG DOES NOT FIT, CONTACT

A QUALIFIED ELECTRICIAN. DO NOT MODIFY THE PLUG IN ANY WAY.

RISK OF ELECTRICAL SHOCK: THE CONTROL MODULE AND

THERMOSTAT HAS NO SERVICEABLE PARTS INSIDE. SEE

WARRANTY FOR SERVICE.

WARNING: BYPASS OF MECHANICAL VENT SPILLAGE SWITCH

(FUME SWITCH) OR BONNET TEMPERATURE LIMIT, IF INSTALLED IS

DANGEROUS. OPERATION MAY CAUSE SEROUS INJURY OR DEATH,

DUE TO CO POISONING OR FIRE.

Automation Correct LLC

Coal-trol Digital™ - Model TS2 V3

Safety Information

Additional Safety Information:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT CONNECT TO A CIRCUIT

AT MORE THAN 150 VOLTS TO GROUND.

FOR INDOOR USE ONLY.

5/2010 R0

Page 3