Gainlab Audio GL-TC1 매뉴얼 - 페이지 10

{카테고리_이름} Gainlab Audio GL-TC1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainlab Audio GL-TC1 16 페이지. Dictator stereo vari-m compressor

POWER SWITCH

mains, if you want to disconnect the device completely from the mains, unplug the

device from the mains or switch oﬀ the main switch at the IEC socket !

DICTATOR STEREO VARI-μ COMPRESSOR

The unit is switched on with the switch marked POWER. Set

the switch labeled POWER to the up position if you want to

turn on the unit. Set the switch labeled POWER to the down

position when not in use.

Due to the tube design of the device, it is advisable to leave

a "warm-up time" of 15-20 minutes before starting use.

ATTENTION! the switch labeled POWER puts the device in

standby mode, does not completely disconnect it from the

The switch on the back of the device allows the outgoing

audio connection to be disconnected from ground, thus

eliminating ground loop phenomena that occur under

certain conditions. To adjust the ground defrost, set the

GROUND LIFT switch on the rear panel to the up position.  

! 9