dynatec IN-6000 사용 지침 및 유지 관리 매뉴얼 - 페이지 5

{카테고리_이름} dynatec IN-6000에 대한 사용 지침 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dynatec IN-6000 8 페이지. Instantaneous safety gear

INSTRUCTIONS: IN-6000

Cod: DYN 27.04

Date: 20/10/2020

Revision: 04

3 INSTALLATION AND ADJUSTMENT

3.1 ASSEMBLY ON THE FRAME

The holes should be made on the frame's uprights to secure the safety gear, according to the dimensions

and position displayed in the safety gear drawings attached, ensuring that the guide rail's axis is centred with

the frame.

To secure the safety gear onto the frame, we recommend a 79.09 Nm tightening torque for grade 8.8 M12

bolts, and of 111 Nm for grade 10.9 bolts.

Figure 2 Assembling the safety gear onto the frame

⚠

Safety gear position: The safety gears should be assembled in the position displayed in Figure 3

Figure 3: Direction of assembly

During assembly, the safety gear should be perfectly aligned with the guide rails, both vertically and

horizontally. Improper assembly may cause the safety gear to function incorrectly.

Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the

customer area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/