Copernicus COP-IS2 조립 설명서 - 페이지 14

{카테고리_이름} Copernicus COP-IS2에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Copernicus COP-IS2 16 페이지.

You will need:

Telescoping Rod x 2

Install Telescoping Rods

Slide Telescoping Rods into the left

and right side of the Square

Accessory Rod.

Insert Knobs into place on the

Accessory Rod. Loosening these will

allow for the rods to slide in or out,

while tightening them will hold the

rods at the desired location.

Ensure that the correct hook is on

the left and right side. Hooks should

face towards the back of the unit.

Actual Size:

You will need:

Front Channel x 2

1 Left, 1 Right

Install Front Channels

Identify the right and left Front

Channels

Align the Front Channels with the

bottom holes on the Middle and

Front Frame

It may help to loosely install first,

and tighten once both bolts are

through the part.

(Not to Scale)

x 4

(Not to Scale)

IS2 - Version E - Released 22 June 2010 - Copernicus Educational Products Inc.

Knob x 2

x 4

Top

Bottom

Right Side