Copernicus COP-IS2 Руководство по сборке - Страница 14

Просмотреть онлайн или скачать pdf Руководство по сборке для Учебное оборудование Copernicus COP-IS2. Copernicus COP-IS2 16 страниц.

You will need:

Telescoping Rod x 2

Install Telescoping Rods

Slide Telescoping Rods into the left

and right side of the Square

Accessory Rod.

Insert Knobs into place on the

Accessory Rod. Loosening these will

allow for the rods to slide in or out,

while tightening them will hold the

rods at the desired location.

Ensure that the correct hook is on

the left and right side. Hooks should

face towards the back of the unit.

Actual Size:

You will need:

Front Channel x 2

1 Left, 1 Right

Install Front Channels

Identify the right and left Front

Channels

Align the Front Channels with the

bottom holes on the Middle and

Front Frame

It may help to loosely install first,

and tighten once both bolts are

through the part.

(Not to Scale)

x 4

(Not to Scale)

IS2 - Version E - Released 22 June 2010 - Copernicus Educational Products Inc.

Knob x 2

x 4

Top

Bottom

Right Side