HighPoint RocketRAID 2680 설치 매뉴얼 - 페이지 4
{카테고리_이름} HighPoint RocketRAID 2680에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RocketRAID 2680 8 페이지. Sas controller
페이지 인쇄
Rocket RAID 2680 FreeBSD Installation Guide
#umount /mnt
Note
If the floppy diskette is inserted into an USB floppy controller and the device name
in the system is da0, then replace fd0 in the upper command with da0. The driver
also could be put on a USB disk, and the driver disk can be created as the floppy
diskette. For example: use the first partition of the USB disk da1, then replace fd0
in the upper command with da1s1 or da1.
Step 4 Install FreeBSD
1)
Start installing the FreeBSD by booting from installation CD.
2)
When "Welcome to FreeBSD" screen appears, select "6".
3)
Insert RR2680 driver diskette into floppy drive now. Type in "
(without quotation mark) and then press enter.
load diskx:rr2680-x.x
"
- 2 -