Dynex DX-TVM112 조립 설명서 - 페이지 10
{카테고리_이름} Dynex DX-TVM112에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynex DX-TVM112 13 페이지. Quick setup guide (french)
Dynex DX-TVM112에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), (영어) 빠른 구성 가이드 (2 페이지), (프랑스어) 빠른 설치 가이드 (2 페이지)
10
DX-TVM112
STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed
backs
1 Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that the
brackets are level.
2 Place spacers (H or L) behind the TV brackets. If you are using M4 washers (F), place them between the
spacers and TV brackets and over the holes in the TV brackets. If you are using M6 washers (G), place them
over the holes in the TV brackets. Insert screws (E or K) through the washers, TV brackets, and spacers.
3 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You'll need
E (4)
Screws
or
K (4)
Level
or
Washers
Spacers
or
or
G (4)
H (4)
F (8)
Phillips screwdriver
Installation instructions
or
or
E
or
L (4)
B and C TV brackets