Dynex DX-TVM112 Montagehandleiding - Pagina 10
Blader online of download pdf Montagehandleiding voor {categorie_naam} Dynex DX-TVM112. Dynex DX-TVM112 13 pagina's. Quick setup guide (french)
Ook voor Dynex DX-TVM112: Handleiding voor snelle installatie (2 pagina's), (Engels) Snelle configuratiegids (2 pagina's), (Frans) Snelle installatiegids (2 pagina's)
Pagina afdrukken
10
DX-TVM112
STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed
backs
1 Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that the
brackets are level.
2 Place spacers (H or L) behind the TV brackets. If you are using M4 washers (F), place them between the
spacers and TV brackets and over the holes in the TV brackets. If you are using M6 washers (G), place them
over the holes in the TV brackets. Insert screws (E or K) through the washers, TV brackets, and spacers.
3 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You'll need
E (4)
Screws
or
K (4)
Level
or
Washers
Spacers
or
or
G (4)
H (4)
F (8)
Phillips screwdriver
Installation instructions
or
or
E
or
L (4)
B and C TV brackets