Dynex DX-TVM112 Manual de montagem - Página 10
Procurar online ou descarregar pdf Manual de montagem para Suporte para TV Dynex DX-TVM112. Dynex DX-TVM112 13 páginas. Quick setup guide (french)
Também para Dynex DX-TVM112: Manual de configuração rápida (2 páginas), (Inglês) Guia de configuração rápida (2 páginas), (Francês) Guide D'installation Rapide (Guia de instalação rápida) (2 páginas)
Imprimir página
10
DX-TVM112
STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed
backs
1 Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that the
brackets are level.
2 Place spacers (H or L) behind the TV brackets. If you are using M4 washers (F), place them between the
spacers and TV brackets and over the holes in the TV brackets. If you are using M6 washers (G), place them
over the holes in the TV brackets. Insert screws (E or K) through the washers, TV brackets, and spacers.
3 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You'll need
E (4)
Screws
or
K (4)
Level
or
Washers
Spacers
or
or
G (4)
H (4)
F (8)
Phillips screwdriver
Installation instructions
or
or
E
or
L (4)
B and C TV brackets