AFL FlexScan FS300 빠른 참조 매뉴얼 - 페이지 17
{카테고리_이름} AFL FlexScan FS300에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFL FlexScan FS300 20 페이지. With smartauto and linkmap
페이지 인쇄
Fiber test results
may be stored in the FlexScan internal memory or external USB stick.
A
Saved test results are organized into a Fiber Group sub-folder
Results - Fibers
Save As Screen
F
G
Touch Results
to display File Manager and navigate to the desired Project / Fiber Group folder.
•
F
Project, End 1, End 2, and Cable are user-defined in Text Editor.
•
Fiber number auto-increments after each save, but can be modified in Number Editor as needed.
•
Touch Done
when finished.
G
•
For Bi-directional OTDR reports, results must be obtained and stored from each end of the network:
Use same test settings (range, pulse width, etc.) in both directions; Use same launch and receive cables in both
•
directions; Swap End1, End2 names; Bi-directional averaging and report generation is performed using TRM 3.0.
File Manager
Fiber Groups
A
A name of the saved result consists of several parameters, which are
D
defined in the Save As screen
End 1_End 2_Cable_Fiber#_Wavelength
Fiber Group Name
within a Project folder
B
B
E
.
D
E
Fiber#
17
.
C
Projects
S13 for 1310 nm
S15 for 1550 nm
M85 for 850 nm
M13 for 1300 nm
C