AFL OptiNID 500 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} AFL OptiNID 500에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFL OptiNID 500 8 페이지. Optical demarcation closure

PACKAGE CONTENTS: ACCESSORIES

Single Fusion Splice Chip Kit

Security Cover

Mounting Screws

216-Style Socket Tool

Flat head Screwdriver

Compression Fitting Kit

Splice Chip Kit

Pigtail Kit

1. Using local engineering practices, determine the mounting position of the closure on the wall.

2. Using the provided mounting screws, secure the closure to the wall.

Note: When mounting to a pole, the two mounting tabs located on the back of the closure

are designed to accept a Del Tec strap.

1. Using a standard 216 style tool, or similar, loosen the

screw located on the right side of the closure door.

Do not remove this screw from the closure doors.

2. Press the tab located above the hex screw in to open

the closure. (Figure 1)

Note: A pad lock, not provided, may be utilized if

additional security is desired.

INSTALLATION INSTRUCTIONS

OptiNID

Specifications are subject to change without notice.

500 Optical Demarcation Closure

Figure 1

Tab

Screw