Dynojet Power Commander III USB EX 설치 지침 - 페이지 2
{카테고리_이름} Dynojet Power Commander III USB EX에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Commander III USB EX 3 페이지. 2000-2001 honda
Dynojet Power Commander III USB EX에 대해서도 마찬가지입니다: 설치 지침 (3 페이지), 설치 지침 (4 페이지), 설치 지침 (3 페이지), 설치 지침 (3 페이지)
stock connectors
PCIII USB EX
connectors
i106-411EX
unplug this connector
PCIII USB EX
harness
The ignition must be turned OFF before
installation.
1
Remove the seat.
2
Remove the front two fuel tank mounting
bolts.
3
Prop the front of the fuel tank up.
4
Remove the left hand mid fairing.
5
Unplug the connector as shown in Figure A.
6
Route the PCIII USB EX harness from the
inside of the frame and come out in between
the mounts for the left hand radiator as shown
in Figure B.
7
Attach the connectors from the PCIII USB EX to
the stock connector as shown in Figure C.
2000-2001 Honda VFR800 - PCIII USB EX - 2