Dynojet Power Commander III USB EX Installation Instructions - Page 2

Browse online or download pdf Installation Instructions for Control Unit Dynojet Power Commander III USB EX. Dynojet Power Commander III USB EX 3 pages. 2000-2001 honda
Also for Dynojet Power Commander III USB EX: Installation Instructions (3 pages), Installation Instructions (4 pages), Installation Instructions (3 pages), Installation Instructions (3 pages)

Print Page
stock connectors
PCIII USB EX
connectors
i106-411EX
unplug this connector
PCIII USB EX
harness
The ignition must be turned OFF before
installation.
1
Remove the seat.
2
Remove the front two fuel tank mounting
bolts.
3
Prop the front of the fuel tank up.
4
Remove the left hand mid fairing.
5
Unplug the connector as shown in Figure A.
6
Route the PCIII USB EX harness from the
inside of the frame and come out in between
the mounts for the left hand radiator as shown
in Figure B.
7
Attach the connectors from the PCIII USB EX to
the stock connector as shown in Figure C.
2000-2001 Honda VFR800 - PCIII USB EX - 2