Dynojet Power Commander III USB EX Instrukcje instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Jednostka sterująca Dynojet Power Commander III USB EX. Dynojet Power Commander III USB EX 3 stron. 2000-2001 honda
Również dla Dynojet Power Commander III USB EX: Instrukcje instalacji (3 strony), Instrukcje instalacji (4 strony), Instrukcje instalacji (3 strony), Instrukcje instalacji (3 strony)
stock connectors
PCIII USB EX
connectors
i106-411EX
unplug this connector
PCIII USB EX
harness
The ignition must be turned OFF before
installation.
1
Remove the seat.
2
Remove the front two fuel tank mounting
bolts.
3
Prop the front of the fuel tank up.
4
Remove the left hand mid fairing.
5
Unplug the connector as shown in Figure A.
6
Route the PCIII USB EX harness from the
inside of the frame and come out in between
the mounts for the left hand radiator as shown
in Figure B.
7
Attach the connectors from the PCIII USB EX to
the stock connector as shown in Figure C.
2000-2001 Honda VFR800 - PCIII USB EX - 2