Afore HNS2000TL 설치 매뉴얼 - 페이지 12

{카테고리_이름} Afore HNS2000TL에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Afore HNS2000TL 15 페이지.

To assemble the DC plug connectors, proceed as detailed below. Ensure the plug connectors have

the correct polarity. The whole connector will include the male side and female side as showed

below.

Assembly Instructions:

1. Adjust the striper stopper and put the cable in corresponding notch to strip the length of

12mm. Please see below figures.

2. Insert striped cable into contact barrel and insure all conductor strands are captured in the

contact barrel. Please see below figures.

3. Compress them together with the crimping pliers. Please see below figures.

4. Insert contact cable assembly into back of male and female connector. A "click" should be

heard or felt when the contact cable assembly is seated correctly. Then turn the cap to the

coupler. Please see below figures.

5.3.3 Connecting the PV Generator (DC)

DANGER!

Danger to life due to high voltages in the inverter.

• Before connecting the PV generator, ensure that the AC&DC circuit breaker is switched off and

that it cannot be reactivated.