Gamma Progression ST II 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Gamma Progression ST II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Progression ST II 19 페이지.
Gamma Progression ST II에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지)

페이지 인쇄

MOUNTING THE FRAME

Adjusting the Frame Support Posts

Loosen the lock bolts of the frame support

posts and space them apart with the frame

support slides separated by the approximate

length of the racquet head. Although it is not

required, it is good practice to center the sup-

port posts on the turntable. Lock one of the

posts in position by tightening the lock bolt and

position the other post until the frame support

slide is positioned near the inside surface of

the racquet frame. Securely tighten the lock

bolt of the second support post.

Caution: To avoid racquet damage, the center

posts should not contact the racquet prior to

locking down the support posts.

Tightening the Frame Supports

Tighten the Frame Support Slides by turn-

ing the adjustment knob clockwise until

snug against the racquet frame and slight

resistance is felt.

Caution: Overtightening the Center Supports

will stretch the head of the racquet and could

cause racquet damage.

Frame Shoulder Support Adjustment

Being sure the shoulder supports are free

to swivel in their mountings, simultaneously

rotate the shoulder support adjustment knobs

clockwise until both shoulder supports gently

and squarely contact the frame.