Major Manufacturing HIT-41 SERIES 사용 설명서 - 페이지 6

{카테고리_이름} Major Manufacturing HIT-41 SERIES에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major Manufacturing HIT-41 SERIES 12 페이지. Electric strike templates

Align the HIT-41 template to the pencil marks

and attach to the jamb using tek point dry

wall screws. It is a good idea to use a drill

with a clutch feature, you don't want to snap

the screw off in the jamb.

Some HIT-41 templates have one screw hole

top and bottom and some have two. These

holes will align the factory mounting tabs

needed later, some factory tabs are mounted

with one and some with two. How many are

needed depends on the strike you are using.

One screw top and bottom will hold the

template. The second hole for the tab can be

located by drilling with a 9/64" drill bit or by

using a second screw.

Template mounted and ready to go.

We recommend the area to be routed be

lubricated with a cutting lube. We use a

product called Tapmatic Edge Cream made

by the LPS Company. You can find this

product at industrial hardware stores or

machine shop supplies. This is also a handy

product to use for other drilling or tapping

chores.