Major Manufacturing HIT-41 SERIES Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Por fechaduras Major Manufacturing HIT-41 SERIES. Major Manufacturing HIT-41 SERIES 12 páginas. Electric strike templates

Imprimir página

Align the HIT-41 template to the pencil marks

and attach to the jamb using tek point dry

wall screws. It is a good idea to use a drill

with a clutch feature, you don't want to snap

the screw off in the jamb.

Some HIT-41 templates have one screw hole

top and bottom and some have two. These

holes will align the factory mounting tabs

needed later, some factory tabs are mounted

with one and some with two. How many are

needed depends on the strike you are using.

One screw top and bottom will hold the

template. The second hole for the tab can be

located by drilling with a 9/64" drill bit or by

using a second screw.

Template mounted and ready to go.

We recommend the area to be routed be

lubricated with a cutting lube. We use a

product called Tapmatic Edge Cream made

by the LPS Company. You can find this

product at industrial hardware stores or

machine shop supplies. This is also a handy

product to use for other drilling or tapping

chores.