Major Manufacturing HIT-41 SERIES Talimatlar Kılavuzu - Sayfa 6
Kilitler tarafından Major Manufacturing HIT-41 SERIES için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Major Manufacturing HIT-41 SERIES 12 sayfaları. Electric strike templates
Sayfayı YazdırAlign the HIT-41 template to the pencil marks
and attach to the jamb using tek point dry
wall screws. It is a good idea to use a drill
with a clutch feature, you don't want to snap
the screw off in the jamb.
Some HIT-41 templates have one screw hole
top and bottom and some have two. These
holes will align the factory mounting tabs
needed later, some factory tabs are mounted
with one and some with two. How many are
needed depends on the strike you are using.
One screw top and bottom will hold the
template. The second hole for the tab can be
located by drilling with a 9/64" drill bit or by
using a second screw.
Template mounted and ready to go.
We recommend the area to be routed be
lubricated with a cutting lube. We use a
product called Tapmatic Edge Cream made
by the LPS Company. You can find this
product at industrial hardware stores or
machine shop supplies. This is also a handy
product to use for other drilling or tapping
chores.
6