Makita 3706 사용 설명서 - 페이지 5

{카테고리_이름} Makita 3706에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3706 17 페이지. Cutout tool
Makita 3706에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지), 사용 설명서 (10 페이지), 부품 설명서 (2 페이지), 사용 설명서 (13 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

10. Always use with the shoe securely

attached to the tool and positioned flat

and firmly against the workpiece.

11. Hold the tool firmly.

12. Do not perform any operation using your

hands to support or guide the workpiece.

13. Keep hands away from moving parts.

14. Do not use this tool for drilling.

15. Do not leave the tool running. Operate the

tool only when hand-held.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this

instruction manual may cause serious personal injury.

SYMBOLS

The followings show the symbols used for tool.

V ....................... volts

A ....................... amperes

Hz ..................... hertz

................ alternating current

16. Always switch off and wait for the bit to

come to a complete stop before removing

the bit from workpiece.

17. Do not touch the bit or the workpiece

immediately after operation; it may be

extremely hot and could burn your skin.

18. Always lead the power supply cord away

from the tool towards the rear.

19. Some material contains chemicals which

may be toxic. Take caution to prevent

working dust inhalation and skin contact.

Follow material supplier safety data.

....................no load speed

....................Class II Construction

.../min................revolutions or reciprocation per

minute

USD201-2