Makita 3706 Kullanım Kılavuzu - Sayfa 5

Elektrikli Alet Makita 3706 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 3706 17 sayfaları. Cutout tool
Ayrıca Makita 3706 için: Kullanım Kılavuzu (14 sayfalar), Kullanım Kılavuzu (10 sayfalar), Parça Kılavuzu (2 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (12 sayfalar)

10. Always use with the shoe securely

attached to the tool and positioned flat

and firmly against the workpiece.

11. Hold the tool firmly.

12. Do not perform any operation using your

hands to support or guide the workpiece.

13. Keep hands away from moving parts.

14. Do not use this tool for drilling.

15. Do not leave the tool running. Operate the

tool only when hand-held.

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this

instruction manual may cause serious personal injury.

SYMBOLS

The followings show the symbols used for tool.

V ....................... volts

A ....................... amperes

Hz ..................... hertz

................ alternating current

16. Always switch off and wait for the bit to

come to a complete stop before removing

the bit from workpiece.

17. Do not touch the bit or the workpiece

immediately after operation; it may be

extremely hot and could burn your skin.

18. Always lead the power supply cord away

from the tool towards the rear.

19. Some material contains chemicals which

may be toxic. Take caution to prevent

working dust inhalation and skin contact.

Follow material supplier safety data.

....................no load speed

....................Class II Construction

.../min................revolutions or reciprocation per

minute

USD201-2