Makita 3706 Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Power Tool Makita 3706. Makita 3706 17 pages. Cutout tool
Also for Makita 3706: Instruction Manual (14 pages), Instruction Manual (10 pages), Parts Manual (2 pages), Instruction Manual (13 pages), Instruction Manual (12 pages)

Makita 3706 Instruction Manual
10. Always use with the shoe securely
attached to the tool and positioned flat
and firmly against the workpiece.
11. Hold the tool firmly.
12. Do not perform any operation using your
hands to support or guide the workpiece.
13. Keep hands away from moving parts.
14. Do not use this tool for drilling.
15. Do not leave the tool running. Operate the
tool only when hand-held.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
SYMBOLS
The followings show the symbols used for tool.
V ....................... volts
A ....................... amperes
Hz ..................... hertz
................ alternating current
16. Always switch off and wait for the bit to
come to a complete stop before removing
the bit from workpiece.
17. Do not touch the bit or the workpiece
immediately after operation; it may be
extremely hot and could burn your skin.
18. Always lead the power supply cord away
from the tool towards the rear.
19. Some material contains chemicals which
may be toxic. Take caution to prevent
working dust inhalation and skin contact.
Follow material supplier safety data.
n
....................no load speed
˚
....................Class II Construction
.../min................revolutions or reciprocation per
minute
USD201-2
5