CORNING LSE 6705 사용 설명서 - 페이지 5

{카테고리_이름} CORNING LSE 6705에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING LSE 6705 8 페이지. Platform rockers
CORNING LSE 6705에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

3.3 Adjusting the Angle

Unload the platform. Locate the knob on the right hand side of the rocker. Note the tilt degree

markings on the platform drive rod (front center under platform). Loosen knob on the side by

rotating counterclockwise. Adjust the platform to desired tilt angle. Retighten the knob on

the side by turning clockwise. Test the unit without load to ensure platform is tight.

NOTE: You many need to turn the rocker on and off to change drive rod position before adjusting.

3.4 Attaching the Power Cord

Connect the main power cord to the rocker and then connect the plug end of the cord to a

grounded wall socket. Avoid lines to which powerful electric motors, refrigerators, and similar

devices are connected.

Be careful when you plug the cord to a grounded wall socket. Do not touch plug

with wet hands. Do not pull the plug by the cord.

3.5 Installing Double Stacking Platform

1. Set the posts (A) through the 4 holes at the corners of the bottom platform.

2. Add a washer (B) and nut (C) to each post.

3. Fit the upper platform (D) on the top of the 4 posts through the corner holes.

4. Screw on the 4 metal knurl nuts (E) to secure the upper platform.

NOTE: Misuse or unauthorized modifications will waive the warranty rights. If the equipment

is used in a manner not specified by the manufacturer, the safety features of the rocker may

be impaired.

Instruction Manual