CORNING LSE 6710 사용 설명서 - 페이지 7
{카테고리_이름} CORNING LSE 6710에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING LSE 6710 12 페이지. Digital vortexer
CORNING LSE 6710에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지)
페이지 인쇄5.2 Basic Operation
Power
Press the Power switch on the control panel. The vortexer automatically detects supply
frequency of 50 or 60Hz, and displays F50 or F60. Then the display switches to show the set
Time and illuminates the Time light.
Power
Time signal light is on. By rotating the encoder knob right (+) or left (-) the set time can be
selected from 30 seconds to 99 minutes 50 seconds:
99.5 = 99 minutes 50 seconds
•
9.59 = 9 minutes 59 seconds
•
0.30 = 30 seconds
•
Power
If you want to set the timer to hold – turn the knob left or right until HLd is displayed. You
can reach the HLd function by setting to under 0.30 or above 99.5.
Push the encoder knob to switch modes between Time set mode and RPM set mode.
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Instruction Manual
5