CORNING LSE 6710 Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Equipamento de laboratório CORNING LSE 6710. CORNING LSE 6710 12 páginas. Digital vortexer
Também para CORNING LSE 6710: Manual de instruções (9 páginas)
Imprimir página5.2 Basic Operation
Power
Press the Power switch on the control panel. The vortexer automatically detects supply
frequency of 50 or 60Hz, and displays F50 or F60. Then the display switches to show the set
Time and illuminates the Time light.
Power
Time signal light is on. By rotating the encoder knob right (+) or left (-) the set time can be
selected from 30 seconds to 99 minutes 50 seconds:
99.5 = 99 minutes 50 seconds
•
9.59 = 9 minutes 59 seconds
•
0.30 = 30 seconds
•
Power
If you want to set the timer to hold – turn the knob left or right until HLd is displayed. You
can reach the HLd function by setting to under 0.30 or above 99.5.
Push the encoder knob to switch modes between Time set mode and RPM set mode.
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Instruction Manual
5