CORNING LSE 6710 Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Equipamento de laboratório CORNING LSE 6710. CORNING LSE 6710 12 páginas. Digital vortexer
Também para CORNING LSE 6710: Manual de instruções (9 páginas)
Imprimir páginaPower
When the run time has elapsed or when you press the Start/Stop button, End will show on
the display and the Run light will flash. When the vortexer completely stops the set speed
and time will return to the last programmed values.
5.3 Additional Operations
Power
If you want to view the set value for RPM during vortexing, rotate the encoder knob for
ONE CLICK right (+) or left (-). The RPM signal light will flash for 2 seconds, and the display
will show the set RPM. After 2 seconds the RPM and the signal light will stop flashing.
NOTE: The vortexer must be in RPM mode – RPM signal light must be on.
Power
If you want to view the set value for Time during vortexing, rotate the encoder knob ONE
CLICK right (+) or left (-). The Time signal light will flash for 2 seconds, and the display will
show the set Time. After 2 seconds the display will return to the count Time, and the signal
light will stop flashing.
NOTE: The vortexer must be in the Time mode – the Time signal light must be on.
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Instruction Manual
7