CORNING LSE 6710 Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CORNING LSE 6710. CORNING LSE 6710 12 pages. Digital vortexer
Également pour CORNING LSE 6710 : Manuel d'instruction (9 pages)

Imprimer la page

Power

When the run time has elapsed or when you press the Start/Stop button, End will show on

the display and the Run light will flash. When the vortexer completely stops the set speed

and time will return to the last programmed values.

5.3 Additional Operations

Power

If you want to view the set value for RPM during vortexing, rotate the encoder knob for

ONE CLICK right (+) or left (-). The RPM signal light will flash for 2 seconds, and the display

will show the set RPM. After 2 seconds the RPM and the signal light will stop flashing.

NOTE: The vortexer must be in RPM mode – RPM signal light must be on.

Power

If you want to view the set value for Time during vortexing, rotate the encoder knob ONE

CLICK right (+) or left (-). The Time signal light will flash for 2 seconds, and the display will

show the set Time. After 2 seconds the display will return to the count Time, and the signal

light will stop flashing.

NOTE: The vortexer must be in the Time mode – the Time signal light must be on.

Run

Time

Speed

Speed(RPMx10) Time (min)

Run

Time

Speed

Speed(RPMx10) Time (min)

Run

Time

Speed

Speed(RPMx10) Time (min)

Start

ENCODER

Stop

PUSH

(Time/Speed)

Start

ENCODER

Stop

PUSH

(Time/Speed)

Start

ENCODER

Stop

PUSH

(Time/Speed)

Instruction Manual