CORNING LSE 6710 사용 설명서 - 페이지 9
{카테고리_이름} CORNING LSE 6710에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING LSE 6710 12 페이지. Digital vortexer
CORNING LSE 6710에 대해서도 마찬가지입니다: 사용 설명서 (9 페이지)
페이지 인쇄Power
When the run time has elapsed or when you press the Start/Stop button, End will show on
the display and the Run light will flash. When the vortexer completely stops the set speed
and time will return to the last programmed values.
5.3 Additional Operations
Power
If you want to view the set value for RPM during vortexing, rotate the encoder knob for
ONE CLICK right (+) or left (-). The RPM signal light will flash for 2 seconds, and the display
will show the set RPM. After 2 seconds the RPM and the signal light will stop flashing.
NOTE: The vortexer must be in RPM mode – RPM signal light must be on.
Power
If you want to view the set value for Time during vortexing, rotate the encoder knob ONE
CLICK right (+) or left (-). The Time signal light will flash for 2 seconds, and the display will
show the set Time. After 2 seconds the display will return to the count Time, and the signal
light will stop flashing.
NOTE: The vortexer must be in the Time mode – the Time signal light must be on.
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Instruction Manual
7