CORNING LSE 6710 Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Лабораторне обладнання CORNING LSE 6710. CORNING LSE 6710 12 сторінок. Digital vortexer
Також для CORNING LSE 6710: Інструкція з експлуатації (9 сторінок)
Друкувати сторінкуPower
When the run time has elapsed or when you press the Start/Stop button, End will show on
the display and the Run light will flash. When the vortexer completely stops the set speed
and time will return to the last programmed values.
5.3 Additional Operations
Power
If you want to view the set value for RPM during vortexing, rotate the encoder knob for
ONE CLICK right (+) or left (-). The RPM signal light will flash for 2 seconds, and the display
will show the set RPM. After 2 seconds the RPM and the signal light will stop flashing.
NOTE: The vortexer must be in RPM mode – RPM signal light must be on.
Power
If you want to view the set value for Time during vortexing, rotate the encoder knob ONE
CLICK right (+) or left (-). The Time signal light will flash for 2 seconds, and the display will
show the set Time. After 2 seconds the display will return to the count Time, and the signal
light will stop flashing.
NOTE: The vortexer must be in the Time mode – the Time signal light must be on.
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Run
Time
Speed
Speed(RPMx10) Time (min)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Start
ENCODER
Stop
PUSH
(Time/Speed)
Instruction Manual
7