Makita 4326M 사용 설명서 - 페이지 6

{카테고리_이름} Makita 4326M에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4326M 13 페이지. Jig saw
Makita 4326M에 대해서도 마찬가지입니다: 사양 (2 페이지), 기술 정보 (7 페이지)

To install the blade, loosen the bolt counterclockwise on

the blade holder with the hex wrench.

With the blade teeth facing forward, insert the blade into

the blade holder as far as it will go. Make sure that the

back edge of the blade fits into the roller. Then tighten

the bolt clockwise to secure the blade.

► 1 . Bolt 2. Blade 3. Roller

To remove the blade, follow the installation procedure

in reverse.

NOTE:

•

Occasionally lubricate the roller.

Hex wrench storage

► 1 . Hook 2. Hex wrench

When not in use, store the hex wrench as shown in the

figure to keep it from being lost.

Adjusting roller (For models

4326/4326M/4327/4327M)

► 1 . Blade 2. Roller 3. Retainer 4. Hex wrench 5. Bolt

Loosen the bolt on the back of the base with the hex

wrench. Move the retainer so that the roller contacts the

blade lightly. Then tighten the bolt to secure the base

and the retainer.

NOTE:

•

Dust cover

► 1 . Dust cover

•

Lower the dust cover to prevent chips from flying.

However, when making bevel cuts, raise it all the way.

6 ENGLISH

6. Base

Occasionally lubricate the roller.

CAUTION:

Always wear safety goggles even when operat-

ing the tool with the dust cover lowered.