GarageAce R5 설치 지침 매뉴얼 - 페이지 14

{카테고리_이름} GarageAce R5에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GarageAce R5 20 페이지. Roller garage door opener

15. Testing the Safety Reverse System

The safety reverse system test is

important.

The garage door must reverse on contact

with a 40mm obstacle laid flat on the floor.

Failure to properly adjust the opener may

result in serious personal injury from a

closing garage door.

Operate the door in the down direction. The

door must reverse upon contact with the

obstacle. If the door stops on the obstacle,

remove obstacle and repeat limit and force

setting (refer Section 14.3).

Repeat the test until the safety reverse system works correctly.

Once you have completed your installation and

successfully carried out the safety reverse system test

(outlined above), install the warning labels provided with

your opener as shown.

The WARNING label must be installed in a prominent

place near any fixed control.

Install the cord handle for the manual release at a height

less than 1.8m.

Please permanently fix the label of manual release on or

near the rope of the motor clutch.

Any fixed wall control or wireless door control must be

mounted at a height of no less than 1.5m out of reach of

children and within sight of the door but away from

moving parts.

Read the Warning section on page 4 for further details

concerning safety.