Garaventa Lift EVACU-TRAC CD7 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Garaventa Lift EVACU-TRAC CD7에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garaventa Lift EVACU-TRAC CD7 20 페이지. Emergency evacuation chair

BRAKE CABLE ADJUSTMENT

Brake cable adjustment is set

and tested at the factory. Under

normal conditions it should not

require further adjustment in the

field.

The Track Parking Brake is a fail-

safe design that is always

engaged by the force of the

Brake Spring in tension. The

Track Parking Brake is released

when the Brake Release Bar is

squeezed. This action tightens

the Brake Cable and releases the

Brake.

If the Brake Cable is adjusted,

it is critical that sufficient slack

remains in the cable so that

full Brake Spring tension is

applied when the Brake

Release Bar is in its neutral,

parking position. Always test

the Brake on the stairway, with

rated load, after adjusting the

Brake Cable.

Cable Adjustment Sequence

The Brake Cable is used to

release the Track Parking Brake

and to deploy the Front Auxiliary

Wheels. For this reason it is

important to use the following

sequence when making Brake

Cable adjustments: