Gardasoft Vision PP860 사용자 설명서 - 페이지 14

{카테고리_이름} Gardasoft Vision PP860에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardasoft Vision PP860 17 페이지. Led lighting controller

Set a continuous current of 0.5A on output channel 3

RS3,0.5

10.1.3

Pulsed Output Mode

Set the pulse parameters.

This command sets a channel to pulsed output. Note that output channel 1 can

only be triggered by INPUT1 and output channel 2 can only be triggered by

INPUT2, etc.

The pulse delay can be from about 2us to 20ms. The pulse width can be any

value from 1us to 20ms.

Syntax:

RTf,p,d,a

Where:

f = output channel (0 to 7)

p = pulse width (microseconds)

d = delay from trigger to pulse (microseconds)

a = output current (A)

Example of Pulsed Output Mode

Set channel 2 to pulsed output at 4A, pulse a continuous current of 0.5A

on output channel 3 for 1ms after a delay of 500us

RT2,1000,500,4