Lexmark 21Z0180 - C 935hdn Color Laser Printer 빠른 참조 - 페이지 2
{카테고리_이름} Lexmark 21Z0180 - C 935hdn Color Laser Printer에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 21Z0180 - C 935hdn Color Laser Printer 10 페이지. Lexmark c935dn: specifications
Lexmark 21Z0180 - C 935hdn Color Laser Printer에 대해서도 마찬가지입니다: 브로셔 (2 페이지), 브로셔 (5 페이지), 연결 매뉴얼 (6 페이지), 설정 (2 페이지), 인쇄 매뉴얼 (4 페이지), 사양 (4 페이지)
페이지 인쇄
Loading the 867- and
1133-sheet trays
Although the 867-sheet tray and the 1133-sheet tray are different
in appearance, they support the same paper sizes and types and
require the same process for loading paper. Use these instructions
to load paper in either tray:
1
Grasp the handle, and open the tray.
2
Squeeze the length guide tab inward as shown, and slide the
guide to the correct position for the paper size being loaded.
3
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges on
a level surface.
4
Load the paper stack with the recommended print side faceup.
5
Make sure the paper guides are secure against the edges of
the paper.
6
Insert the tray into the printer.
7
If a different type of paper was loaded than the type previously
loaded in the tray, change the Paper Type setting for the tray
from the control panel.
2
Using the multipurpose feeder
1
Paper guides
2
Size indicators
3
Stack height limiter
1
Pull the multipurpose feeder tray down.
2
Grasp the extension, and gently pull it out until it is fully
extended.