Lexmark 21Z0180 - C 935hdn Color Laser Printer 빠른 참조 - 페이지 3
{카테고리_이름} Lexmark 21Z0180 - C 935hdn Color Laser Printer에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark 21Z0180 - C 935hdn Color Laser Printer 10 페이지. Lexmark c935dn: specifications
Lexmark 21Z0180 - C 935hdn Color Laser Printer에 대해서도 마찬가지입니다: 브로셔 (2 페이지), 브로셔 (5 페이지), 연결 매뉴얼 (6 페이지), 설정 (2 페이지), 인쇄 매뉴얼 (4 페이지), 사양 (4 페이지)
페이지 인쇄
3
Prepare the paper for loading.
•
Flex sheets of paper back and forth to loosen them, and
then fan them. Do not fold or crease the paper. Straighten
the edges on a level surface.
•
Hold transparencies by the edges, and then fan them.
Straighten the edges on a level surface.
Note: Avoid touching the print side of the transparencies.
Be careful not to scratch them.
•
Flex a stack of envelopes back and forth to loosen them,
and then fan them. Straighten the edges on a level surface.
4
Load the paper, and then adjust the paper guides so that they
lightly touch the edges of the paper stack.
•
Load letter, A4, and transparencies with the recommended
print side facedown and the long edge of the paper
entering the printer first.
•
Load A3, A5, B4, folio, legal, and statement paper with the
recommended print side facedown and the short edge of
the paper entering the printer first.
Notes:
–
Adjust the additional paper guide to accommodate
SRA3 and 12 x 19 paper sizes.
–
Do not exceed the maximum stack height by forcing
paper under the stack height limiter.
•
Load envelopes with the flap side up.
Warning—Potential Damage: Never use envelopes
with stamps, clasps, snaps, windows, coated linings, or
self-stick adhesives. These envelopes may severely
damage the printer.
Note: Load only one size and type of paper at a time.
3
5
Make sure the paper is as far into the multipurpose feeder as
it will go with very gentle pushing. Paper should lie flat in the
multipurpose feeder. Make sure the paper fits loosely in the
multipurpose feeder and is not bent or wrinkled.
6
From the control panel, set the Paper Size and Paper Type.
Printing
Printing a document from
Windows
1
With a document open, click File ª Print.
2
Click Properties, Preferences, Options, or Setup.
3
Adjust the settings.
4
Click OK.
5
Click OK or Print.